Description
Davies Craig EWP80 pump & LCD controller combo
The EWP 80 Electric Water Pump and LCD EWP /Fan Digital Controller Combo simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat, and operate your Thermatic Fan.
The EWP 80 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres, 12 Volt Only.
| Kit Contents | |||
|
EWP COMPONENTS |
HARDWARE BAG COMPONENTS |
||
|
Description |
Qty |
Description |
Qty |
|
EWP Short Kit |
1 |
Scotch Lock |
1 |
|
EWP & FAN Controller |
1 |
Ring Terminal |
1 |
|
Inline Adaptor |
1 |
Ring Terminal (Yellow) |
1 |
|
Wiring Harness (10A Fuse) |
1 |
Self Tap Screws |
1 |
|
Elbow Adaptor 35mm (Nylon) |
1 |
Temp Sensor Assembly |
1 |
|
Straight Adaptor 35mm (Nylon) |
1 |
Adaptor M5 Bolt |
6 |
|
O-Ring |
2 |
Adaptor M5 Nut |
6 |
|
Thin Rubber Sleeves 3mm |
2 |
M5 Cap Screw Long |
6 |
|
Hose Clamps |
4 |
|
|
|
EWP Hardware Bag |
1 |
|
|
| Technical Specifications | ||||
| Technical Specifications – EWP80 | Technical Specification – LCD Controller | |||
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 7.5A @ 13V | Display LCD size | 70mm (2.76 ) x 60mm (2.36 ) | |
| Flow rate (max) | 80 L/min (21.13 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40 to 130 C (-40 to 266 F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design |
Clockwise centrifugal with volute chamber |
Targeted (set) temperatures | Singular degrees from: 60 C (140 F) to 100 C (212 F) |
|
| Pump weight | 900 grams (2.0 lb) | Memory | Set & targeted temperature | |
| Pump material | Nylon 66, 30% glass-filled | Fan cut-in temp. | 3 C (5.4 F) above the targeted (set) temperature | |
| Burst pressure | 350 kPa (50 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type | Thermister in housing | |
| Fits hose sizes | 32mm to 51mm (1 to 2 ) | Overrun/ shutdown | -10 C (14 F) below set/target temperature or 3 minutes | |
| Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | |||
| Weight | 100 grams (3.5 oz) | |||
| Dimensions |
Length = 95mm (3.7″) Width = 130mm (5.1″) Depth = 25mm (1 ) |
|||
The revolutionary, Australian-designed EWP 80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.
The EWP 80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (13hp) of extra power and increased torque.
The LCD EWP /Fan Digital Controller will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.
The Thermatic Fan/s will be activated automatically once the engine coolant rises 3 C (5.4 F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10 C / 14 F below the set temperature) after engine shut down, eliminating heat soak and extending engine life.
The EWP 80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle s engine, including an easy-to-follow DIY instruction booklet.
The world s most advanced total engine cooling management system
- universal fit
- more power
- more cooling
- increase fuel efficiency
- extend engine life
- world-leading technology
- lightweight Nylon
|
Product Selection Guide |
|||||||
|---|---|---|---|---|---|---|---|
| Application | Pump Model | Pump Kit | Pump Combo | Controller / Switch | |||
| Part # 12 V |
Part # 24 V |
Part# 12 V |
Part # 24 V |
Part # 12 V |
Part # 24 V |
||
| Motorbike up to 500cc (Standard) | EBP 15 | 9001 | 0444 or 0455 | ||||
| Motorbike 500cc – 1000cc (Std) | EBP 23 | 9050 | 0444 or 0455 | ||||
| Motorbike 1000cc – 2000cc (Std) | EBP 25 | 9005 | 0444 or 0455 | ||||
| Vehicle Heater System (Standard) | EBP 23 | 9050 | 0444 or 0455 | ||||
| LPG (Butane) System (Standard) | EBP 23 | 9050 | 0444 or 0455 | ||||
| Intercooler (depending on capacity) |
EBP 23 | 9050 | |||||
| EBP 25 | 9005 | ||||||
| EBP 40 | 9040 | 9041 | 0444 or 0455 | 0444 or 0455 | |||
| EWP 80 | 8005 | 8907 | |||||
| Engines up to 2.0L (Standard) | EWP 80 | 8005 | 8907 | 8001 | 8001 | ||
| Engines up to 2.0L – 3.5L (Standard) | EWP 115 | 8025 or 8040 |
8026 or 8041 |
8930 or 8950 |
8931 or 8951 |
8001 | 8001 |
| Engines up to 3.5L – 5.0L (Standard) | EWP 130 | 8080 | 8081 | 8990 | 8991 | 8001 | 8001 |
| Engines 5.0L or greater (Standard) | EWP 150 | 8060 | 8061 | 8970 | 8971 | 8001 | 8001 |
| Modified Engines Supercharged/Turbo |
EWP 150 | 8060 | 8061 | 8970 | 8971 | 8001 | 8001 |
| Drag Racing, Drifting & Speedway | EWP 150 | 8060 | 8061 | 8970 | 8971 | 8001 | 8001 |
| Off Road / 4WDs | EWP 130 | 8080 | 8081 | 8990 | 8991 | 8001 | 8001 |
| Solar Hot Water Systems (depending on size) | EBP 15 | 9001 | 0444 or 0455 | ||||
| EBP 23 | 9050 | 0444 or 0455 | |||||
| EBP 25 | 9005 | 0444 or 0455 | |||||
| EBP 40 | 9040 | 9041 | 0444 or 0455 | 0444 or 0455 | |||
