Description

Walton Motorsport Nissan SR20 OEM Bottom Mount Manifold

If you require a stock fitment manifold that is fit and forget? The Walton Motorsport SR20 Bottom mount Manifold is designed to be a bolt-on direct OEM replacement. Just as compatible as the OEM Manifold. Including S15 ABS Units

There’s no shortage of Nissan SR20 exhaust manifolds available. The construction methods we use set our product apart from the rivals. 

Nissan SR20 OEM Bottom Mount Exhaust Manifold Construction

Material Selection

• First and foremost not all 304 Stainless steel is created equal. We carefully select the exact specification of the tube that we use. The use of poor quality tube can compromise the whole design. For Instance, exhaust manifolds experience repeated high-temperature cycles. In these situations, we have seen poor tubing split along the seam.
• We design the head flanges inhouse. However, we outsource the precision Fiber Laser Cutting. The use of more modern Fiber Laser cutting allows for increased accuracy over traditional laser cutting

Processes

• Where the manifold meets the exhaust ports, Walton Motorsports process is to push the tubing through the head flange and TIG weld each side. This process is followed by a selection of finishing tools. We do this to create a smooth port for the gasses to freely flow through. Consequently, this process greatly increases the durability of the manifold. Rather than using the traditional method of welding the tube to the face of the flange. Moreover, our method is where we also face the problem of an oval port needing to transition smoothly to a round tube. The stubs process, in short, helps increase power through the improved flow.
• The collector we use is a custom-designed cast merge collector. 

More information on our methods can be found HERE

Lifetime Warranty

Bombproof? We haven’t found out yet. Walton Motorsport has designed the manifolds to put up with some serious abuse though. We offer a lifetime warranty on our products as many do. However, we put a huge emphasis on the strength and durability of our products to stop them from failing. The biggest inconvenience when it comes to a failed manifold (providing none of it ends up inside your turbo or engine) is removing it for repair.  By eliminating the failure in the first place, we can honestly say it would be extremely unlikely to experience a failure of our products. Consequently, We wouldn’t sleep well at night if our product failed and cost you a result.

Nissan SR20 Bottom Mount Exhaust Manifold Features

• Carefully selected 304 Stainless steel tube. Working to eliminate the risk of material failure.
• Fully Purged welded. Subsequently improving gas flow leading to increases in power and lowered response times.
• Ported Merge Collector Welded Internally and Externally. Resulting in high strength, durability and turbo lifespan.
• T25/T28 Flange for OEM Turbo Fitment.
• Fully Smoothed Head Ports designed to optimize gas flow. As a result, providing an increase in power and lowered response times.

For further questions please get in contact HERE or +44(0)1494 715206. You can also contact us at [email protected] or Facebook Messenger